Determination of energy damping upon impact load in reinforced concrete sandwich plates with di erent core geometries

dc.authorid0000-0001-5427-7089en_US
dc.contributor.authorSavaş, Sedat
dc.contributor.authorÜlker, Mehmet
dc.contributor.authorTurgut, Seval
dc.contributor.authorBakır, Dursun
dc.date.accessioned2022-03-15T09:06:10Z
dc.date.available2022-03-15T09:06:10Z
dc.date.issued2021en_US
dc.departmentMTÖ Üniversitesi, Mühendislik ve Doğa Bilimleri Fakültesi, İnşaat Mühendisliği Bölümüen_US
dc.description.abstractIt can be challenging to analyze Reinforced Concrete (RC) sandwich plates with hollow structures under impact loads in terms of crushing, punching, cracking, and crack trajectories via static and dynamic equations. In the literature, the finite element solutions were provided after determining the behaviors of the materials based on the test results. Therefore, it is required to test the behaviors of RC plates. To this end, the behaviors of sandwich plates under impact loads were experimentally analyzed in this study. The sandwich plates were manufactured by cutting Polyester Foams (PF) into hexagonal prisms, square prisms, I-type, and S-type and installing them inside the RC plates. The manufactured sandwich plates were 27% lighter than full plates. A weight of 320 kg declined freely from 2.5 m, and the load was implemented at the center of the plate at a velocity of 7.5 m/s. Similar implementations were also conducted for filled plates and the maximum displacements were measured in both types of plate tests. The measurements obtained from each test were compared to determine the sandwich plate with the core geometry which provided the highest absorption and the lowest displacement. In the analyses, the S-type core geometry exhibited greater absorption than other core geometries.en_US
dc.identifier.citationSavaş, S., Ülker, M., Turgut, S., & Bakir, D. (2021). Determination of energy damping upon impact load in reinforced concrete sandwich plates with different core geometries. Scientia Iranica. Transaction A, Civil Engineering, 28(6), 3082-3091.en_US
dc.identifier.doi10.24200/sci.2021.56554.5165
dc.identifier.endpage3091en_US
dc.identifier.issn1026-3098en_US
dc.identifier.issue6en_US
dc.identifier.scopus2-s2.0-85122852775en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage3082en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12899/636
dc.identifier.volume28en_US
dc.identifier.wosWOS:000747208500008en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorÜlker, Mehmet
dc.language.isoenen_US
dc.publisherSharif University of Technologyen_US
dc.relation.ispartofScientia Iranicaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectImpact effecten_US
dc.subjectImpact loaden_US
dc.subjectImpact testen_US
dc.subjectReinforced concreteen_US
dc.subjectSandwich plateen_US
dc.titleDetermination of energy damping upon impact load in reinforced concrete sandwich plates with di erent core geometriesen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
Makale Dosyası.pdf
Boyut:
980.69 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama: