Burr measurement method based on burr surface area
Yükleniyor...
Tarih
2020
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Korean Society for Precision Engineering
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
One of the major issues of drilling operations pertains to the formation of burrs, which greatly influences the accuracy of the manufactured parts, and, thus, the capability to meet the desired performance of the part. To remove or prevent these burrs, their geometry must be measured accurately, even though they are sharp and irregular in shape. The accurate measurement of the geometry of a burr will lead to the development of a proper deburring method. In this work, the authors describe a simple and convenient new measurement technique for drilling burr profiles and a developed drilling burr measurement system based on surface area. The new method presented in this research aims at providing a comparative evaluation of the height, arc length and area of the burr, as well as its geometrical characteristics. When the average height and arc length measurement methods are compared with the area measurement method, large deviations in burr height are detected. In particular, these deviations increase more in non-uniform burrs. In the measurement of burr size, the new developed method is based on area measurement and is carried out using a computer. Therefore, there is no deviation between the measurements. In contrast, the average deviation ranges for the height and arc length measurement methods are found to be 9.94–48.14% and 6.07–18.82%, respectively.
Açıklama
Anahtar Kelimeler
Burr measurement, Drilling, Surface area
Kaynak
International Journal of Precision Engineering and Manufacturing - Green Technology
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
Sayı
Künye
Bahçe, E., & Özdemir, B. (2020). Burr measurement method based on burr surface area International Journal of Precision Engineering and Manufacturing-Green Technology, 1-10.
