Preperation and Performance Comparision of Autoclaved Aerated Concrete by Using Ceramic and Glass Wastes Instead of Silica

Basit Öğe Kaydı
dc.contributor.authorSarıcı, Didem Eren
dc.contributor.authorKızılkaya, Nilgün
dc.date.accessioned2025-10-24T17:59:09Z
dc.date.available2025-10-24T17:59:09Z
dc.date.issued2024
dc.departmentMalatya Turgut Özal Üniversitesi
dc.descriptionFDK-2018-1133
dc.description.abstractThis study aimed to produce autoclaved aerated concrete (AAC) by using glass and ceramic waste in 10%, 20%, 30%, 40%, and 50% proportions as a substitute material for quartzite, and samples were produced under low pressure and heat (2.3?bar and 135 ºC). The microstructural properties were investigated by employing scanning electron microscopy (SEM) analysis. Unit weight, porosity, water absorption, ultrasonic wave velocity, compressive strength, and thermal conductivity parameters were experimentally investigated and compared to a control sample produced without waste. Test results showed that waste addition leads to decreasing porosity, water absorption, and increasing unit weight. Additionally, uniaxial compressive strength, thermal conductivity, and ultrasonic wave velocity values were increased by adding waste. The test results showed that glass and ceramic waste can be used as a quartzite sand replacement in the production of AAC and the optimum replacement proportions for the waste materials was 10%.
dc.description.abstractThis study aimed to produce autoclaved aerated concrete (AAC) by using glass and ceramic waste in 10%, 20%, 30%, 40%, and 50% proportions as a substitute material for quartzite, and samples were produced under low pressure and heat (2.3?bar and 135 ºC). The microstructural properties were investigated by employing scanning electron microscopy (SEM) analysis. Unit weight, porosity, water absorption, ultrasonic wave velocity, compressive strength, and thermal conductivity parameters were experimentally investigated and compared to a control sample produced without waste. Test results showed that waste addition leads to decreasing porosity, water absorption, and increasing unit weight. Additionally, uniaxial compressive strength, thermal conductivity, and ultrasonic wave velocity values were increased by adding waste. The test results showed that glass and ceramic waste can be used as a quartzite sand replacement in the production of AAC and the optimum replacement proportions for the waste materials was 10%.
dc.description.sponsorship[TR] İnönü Üniversitesi Bilimsel Araştırma Projeleri Koordinasyon Birimi
dc.identifier.doi10.24012/dumf.1422548
dc.identifier.endpage479
dc.identifier.issn1309-8640
dc.identifier.issn2146-4391
dc.identifier.issue2
dc.identifier.startpage463
dc.identifier.urihttps://doi.org/10.24012/dumf.1422548
dc.identifier.urihttps://hdl.handle.net/20.500.12899/1936
dc.identifier.volume15
dc.language.isoen
dc.publisherDicle University
dc.relation.ispartofDicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzDergiPark_20251023
dc.subjectIndustrial Raw Material
dc.subjectEndüstriyel Hammaddeler [EN] Rock Mechanics and Fortification
dc.subjectKaya Mekaniği ve Tahkimat
dc.titlePreperation and Performance Comparision of Autoclaved Aerated Concrete by Using Ceramic and Glass Wastes Instead of Silica
dc.title.alternativePreperation and Performance Comparision of Autoclaved Aerated Concrete by Using Ceramic and Glass Wastes Instead of Silica
dc.typeArticle

Dosyalar

Koleksiyon

Diğer Yayınlar Koleksiyonu