Ara
Toplam kayıt 17, listelenen: 1-10
Evaluation of Noise Emission in A Textile Plant
(Malatya Turgut Ozal University, 2020)
Textile industry is characterized by the use of complicated machinery in mass production methods in order to meet increased consumption demands. This situation brings with it some issues for the employees. Many of the ...
EMG Sinyallerinin Kısa Zamanlı Fourier Dönüşüm Özellikleri Kullanılarak Yapay Sinir Ağları ile Sınıflandırılması
(Fırat University, 2019)
EMG sinyali kasların kasılması sırasında oluşan elektriksel aktivasyonun ölçülmesi işlemidir. EMG sinyali, kasların nöral
aktivasyonu ve dinamikleri hakkında bilgi sağlamaktadır. Bu nedenle EMG sinyallerinin işlenmesi; ...
Modeling of the effect of falcon concentrator parameters on lignite deashing with Taguchi orthogonal design
(Taylor & Francis, 2021)
In this study, the deashing of Sivas-Kangal (Turkey) lignite was carried out under different conditions. Solids ratio (20%, 30%, 40% and 50% by weight), centrifugal force (20, 100, 176 and 300 G), feed rate (0.5, 1.0, 1.5 ...
Determination of energy value and ash-sulfur content of clean fuel obtained from lignite carbonization at different heating rates
(2021)
Carbonization (low-temperature pyrolysis) is an economical and efficient method used to obtain solid products from lignite and improve calorific value. This research focused on the morphological and structural properties ...
Düşük ısıl değerli linyit ve atık biyokütlenin dumansız yakıt olarak kullanılabilirliğinin araştırılması
(Bursa Uludağ Üniversitesi, 2021)
Enerji, bir toplumun en önemli temel ihtiyaçlarından biridir. Gelişmekte olan ve az gelişmiş ülkelerdebu enerji ihtiyacının çoğu fosil enerji kaynaklarından karşılanmaktadır. Bu kaynaklar, hem sınırlı hem deçevreyi olumsuz ...
A study on the investıgation of improvement in coal liquefaction product efficiency
(Eskişehir Teknik Üniversitesi, 2019)
The aim of this study is to improve the yields of Malatya-Arguvan lignite liquefaction products (char, preasphaltene, asphaltene, oil-gas). For this purpose, the liquefaction experiments of coal which was firstly raw and ...
Highly Active Fe3O4@SBA-15@NHC-Pd Catalyst for Suzuki–Miyaura Cross-Coupling Reaction
(Springer, 2021)
A novel Pd-NHC functionalized magnetic Fe3O4@SBA-15@NHC-Pd was synthesized and used as an efficient heterogeneous catalyst in the Suzuki–Miyaura C–C bond formation reactions. The Fe3O4@SBA-15@NHC-Pd characterized by X-Ray ...
Burr measurement method based on burr surface area
(Korean Society for Precision Engineering, 2020)
One of the major issues of drilling operations pertains to the formation of burrs, which greatly influences the accuracy of the manufactured parts, and, thus, the capability to meet the desired performance of the part. To ...
Residual strength prediction based on size effect of cracked concrete members
(ICE Publishing, 2021)
In engineering materials, defects, such as cracks, may occur during production and/or owing to various reasons. One of the aims of fracture mechanics is to determine the fracture toughness-based residual strength of ...
Determination of tensile strength of cementitious composites using fracture parameters of two-parameter model for concrete fracture
(Elsevier, 2022)
In this study, the formulation of the two-parameter model based on the size effect proposed by previous researchers was initially improved to be much more practical. Subsequently, six series of notched and unnotched beams ...