Ara
Toplam kayıt 11, listelenen: 1-10
Geological, Mineralogical, Geochemical Properties, and Characterization of Marine Zeolite
(2021)
The study investigates marine Hekimhan (Malatya) zeolites. The unit was sandstone interlayered, green, hard, fine-thicklayered (5-500 cm), and fine-laminated. Its type section has a thickness of 37 m and has a consistency ...
TBDY-2018’deki Yerel Zemin Koşullarının Çelik Yapı Deprem Davranışına Etkisi Üzerine Bir Çalışma
(Bitlis Eren Üniversitesi, 2021)
Depremlerin, yapılar üzerindeki etkilerini azaltmak adına yapı-zemin-deprem etkileşiminin gerçekçi olarak ortaya konulabilmesi önemlidir. Bu çalışma kapsamında, Türkiye Bina Deprem Yönetmeliğinde yer alan beş farklı yerel ...
Düşük ısıl değerli linyit ve atık biyokütlenin dumansız yakıt olarak kullanılabilirliğinin araştırılması
(Bursa Uludağ Üniversitesi, 2021)
Enerji, bir toplumun en önemli temel ihtiyaçlarından biridir. Gelişmekte olan ve az gelişmiş ülkelerdebu enerji ihtiyacının çoğu fosil enerji kaynaklarından karşılanmaktadır. Bu kaynaklar, hem sınırlı hem deçevreyi olumsuz ...
Effect of macro and micro fiber volume on the flexural performance of hybrid fiber reinforced SCC
(Techno Press, 2020)
The aim of this study is to investigate the flexural performance of hybrid fiber reinforced self-compacting concrete (HFRSCC) having different ratio of micro and macro steel fiber. A total of five mixtures are prepared. ...
Determination of the effect of different gravity methods on the removal of ash and sulfur from Arguvan lignite
(Alanya Alaaddin Keykubat Üniversitesi, 2020)
This study, it is aimed to find out the beneficiation of Malatya-Arguvan lignite by gravity methods. First of
all, the washability of lignite has been investigated with sink-float experiments. It has been determined ...
Comparison of extreme learning machine and deep learning model in the estimation of the fresh properties of hybrid fiber-reinforced SCC
(Springer, 2021)
This paper studied the estimation of fresh properties of hybrid fiber-reinforced self-compacting concrete (HR-SCC) mixtures with different types and combinations of fibers by using two different prediction method named as ...
An IDW-based GIS application for assessment of geotechnical characterization in Erzincan, Turkey
(Springer, 2021)
Preparing maps for geotechnical characterization in earthquake-prone areas is significantly important for decision-makers and local-planners in order to reduce loss of lives. This study presents a series of maps for Erzincan ...
Determination of energy damping upon impact load in reinforced concrete sandwich plates with di erent core geometries
(Sharif University of Technology, 2021)
It can be challenging to analyze Reinforced Concrete (RC) sandwich plates with hollow structures under impact loads in terms of crushing, punching, cracking, and crack trajectories via static and dynamic equations. In the ...
Mechanical and microstructural properties of polypropylene fiber-reinforced geopolymer composites
(The Society of Fiber Science and Technology, 2019)
Geopolymers are a kind of polymeric material that can be formed using industrial applications based on inorganic polycondensation. They can be used in applications to replace traditional cement with environmental and ...
Bond strength of reinforcing bars in hybrid fiber-reinforced SCC with binary, ternary and quaternary blends of steel and PVA fibers
(Springer, 2021)
In this study, the effect of inclusion of single fiber and binary, ternary and quaternary fiber hybridization on the bond performance of high strength self-compacting concrete (SCC) was investigated and 12 beam specimens ...